1 / 1
Bambu X1C Muffler (8X3mm) magnets
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of the OurAngryBadger model without the BambuLab logo and only with magnets for the mounting.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 96
- Makes
- 0
- Views
- 10,013
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Public Domain
I have a lot of 8x3mm magnets so I modified the OurAngryBadger model in order to mount the muffler only with magnets.
Print / Install Instructions:
- I recommend printing with 4 walls, 6 top and bottom layers, and 0.16mm layer height on Bambu X1. You want a very solid shell so that air/noise doesn't escape as easily. PLA material is fine.
- You will need to use supports under the side slotted magnets mounts on the sides only. The rest of the muffler will print fine with bridging. I recommend painting-on supports.
- After printing, you can place (glue in) the magnets into the holes.