Prusa MINI Bed GoPro Session Mount
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.93 – €1.14 net (excluding VAT)
For file: Prusa Mini Bed GoPro Session Mount_0.2mm_PETG_MINI_1h10m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.03 excluding VAT (range midpoint).
- Weight reported by the author
- 11 g
- Print time reported by the author
- 1.16 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Mount for the GoPro Session to the Prusa MINI Bed for doing time-lapses/video of prints.
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 36
- Makes
- 1
- Views
- 394
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
Redesign of the excellent Prusa Mini Gopro Mount but centering the camera for the GoPro Session as well as making it longer to clear the hotend in all cases. Works well paired with Gopro Hero Session 5 Case.
Need an M3x10mm bolt to replace the M3x8mm you need to remove to install this on the bed frame. Alternatively, print the spacer and use an M3x12mm bolt (there are some in the MINI spare parts).