Echo Power Outlet Holster

No assembly or addition material required. Just 3D print, insert echo dot and plug in!

The echo dot is often placed on counter tops where space is limited. This wall holster allows it to be fixed into a wall outlet using the power adapter that comes with.
Minimalist design stays out of the way of the 7 mic array and the downward firing speaker which sounds great when placed against a wall. Seems to project sound over a wider area.

Print instructions

Category: 3D Printing Summary

No assembly or addition material required. Just 3D print, insert echo dot and plug in!

The echo dot is often placed on counter tops where space is limited. This wall holster allows it to be fixed into a wall outlet using the power adapter that comes with.
Minimalist design stays out of the way of the 7 mic array and the downward firing speaker which sounds great when placed against a wall. Seems to project sound over a wider area.

Print Settings

Printer Brand: Prusa

Printer: Prusa Clone

Rafts: Doesn't Matter

Supports: No

Resolution: 0.2

Infill: 10

Notes:

Can be printed without support structure if you have an extruder fan that cools the print.

How I Designed This

This was designed to be as minimal as possible. To support the echo dot against the wall without getting in its way at all.
The tiny teeth securing the echo dot will not get in the way of the 7 mic array. The open back allows the downward firing speaker to resonate sound through the wall instead of the table surface.
The cable opening allows the echo to be oriented either left or right and perfectly frames the Amazon logo.

Final Design