Shopvac Wheel Disc 103mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Shopvac Wheel Disc that holds the wheel onto the axle. The ones that come with the Shopvac may have damaged tabs.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 141
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
This is a Shopvac Wheel Disc for Shopvac Model 5830411. 4-Gallon 5.5HP Corded Wet Dry ShopVac. The wheel discs that came with it had mangled tabs. I reached out to Shopvac support but decided it might be easier for me to just design and print the replacement.
The disc itself is 103mm in Diameter, with the post in the Axle going about 50mm. I encourage you to check the measurements of your own.
In the photos, the ones from Shopvac are in RED. My replacement design is in Black.
I printed in Overture Black PETG, no supports. Just rotate the STL over to print on the flat side first.
Insert into axle and look from the otherside for the tab, once it goes through the hole it should be tight enough to not come out under normal usage.
I have included a model v3 of this design that has a locking tab and a little longer extension. I have not tested it.