Dyson DC23 Impeller - V2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement impellor for Dyson vacuums V2 Updated on 3/20/23
- Rating
- 5 / 5
- Likes
- 25
- Downloads
- 544
- Makes
- 0
- Views
- 3,077
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
UPDATE 3/20/2023:
I've updated the design a bit so that it fits better inside the vacuum.
It now resembles the original part a bit more.
V2 Changes:
- The underside now has a hollow cone shape.
- The part is shorter so it fits better
- Zero supports needed
- The center hole is slightly smaller so it fits the shaft tighter.
- The part is now 4-5 grams lighter.
- New photos to the post so you can see how it's installed.
Description:
My Dyson DC23 canister vacuum stopped spinning the brush heads. I took it apart and found that the impeller was broken and could not longer hold itself to the metal shaft in the head.
I did not want to buy a $100 part or a new vacuum so I designed this replacement impeller for my Dyson vacuum.
I've had it installed for about 8 months prior to this post and have had no issues or problems with it.
---
This part is verified working the the following part:
Turbine head
Part no. 906565-32
https://www.dyson.com/support/journey/spare-details.906565-32.19076-01
It might work with other models but I don't know which ones. If you do know, please leave a comment.
Thanks.
- PRINTING -
Max infill of 30% otherwise it will be too heavy
PETG or better. (PLA might work)
My print settings (0.6mm Nozzle):
Material: PCTG
Nozzle: 0.6mm CHT
Layer Height: 0.2mm
Walls: 2
Infill: 25% Gyroid
Temperature: 260C