1 / 2
VCORE3 Y endstop for larger Y position than stock
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
On my VCORE3 500, the stock Ymax endstop did not allow me to place Y=500mm far enough back into the printer and this…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 17
- Makes
- 0
- Views
- 129
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
On my VCORE3 500, the stock Ymax endstop did not allow me to place Y=500mm far enough back into the printer and this meant I couldn't print on the bed at any dimension under Y=7mm (instead of Y=0!). The stock Ymax endstop was too big. This endstop allows for alot more adjustment in the Y+ direction (7.5mm more!) so you can use the entire print surface.
You'll need to use a m5x10 screw (instead of the stock m5x12) to mount it to the 3030 rail.
Category: 3D Printer Parts