mAx Team Bull Bar Bumper Upgrade for 3D SETS Model 14 (Max Team)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Transform your 3D SETS Model 14 Max Team as the mAx Team van with a 1 color 3D printer
- Rating
- 4.833 / 5
- Likes
- 46
- Downloads
- 404
- Makes
- 9
- Views
- 1,585
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Warning
Already printed but not yet assembled with all the Max Team van. Modeling seems to be ok but it should be tested in the real life.
Definition
C1 is the bottom color, C2 the middle one and C3 the top one.
Printing
Is required the same printer size than 3D SETS has defined.
Use the same setting than 3D SETS Front Bumper for the modified Front Bumper part.
For the Bull Bar the front face should be on the bed .
Infill 100% for the Bull Bar.
Build
Supports should be removed for the Front Bumper (x2) and the Bull Bar (x2).
Slide the Bull Bar inside the modified Front Bumper ; you can use some WD40 to an esay slidding.
The build required extra screws to assemble the modified Front Bumper and the Bull Bar ; 2 M2x10.
Feedback
It is welcome.
Remark
None.
Version
v20230102 1st upload.