MOS-FET NO screws holding plate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
MOS-FET NO screws holding plate
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 27
- Makes
- 0
- Views
- 203
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Holder Plate for MOS-FET Upgrade.
To decouple the 12V from the mainboard for the heaters.
That the heaters are directly conected to the Powersupply.
Never again BURNED Power Plugs on the Mainboard.
No screws are needed.
Just place the modules on the pins and push them down.
Ther are 2 Designes.
MOS-FET_plate_single_V1 for a single MOS-FET module.
MOS-FET_plate_dual_V1 for 2 MOS-FET modules.
For a better heat transfer, add some Thermal Grease between the MOS-FET and the heatsink. Im sure you have some laying arround.
reference link for MOS-FET:
https://www.aliexpress.com/item/1005003412288173.html