Bed Level Calibration Test
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Make sure your bed is level in all quadrants. 185mm x 185mm x 0.4mm
- Rating
- 4.286 / 5
- Likes
- 53
- Downloads
- 4,207
- Makes
- 10
- Views
- 7,352
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Public Domain
This bed level test measures 185mm x 185mm x 0.4mm thick.
Check and adjust you bed level before printing actual parts. Using this to set your bed will ensure maximum adhesion. The thickness is 0.4mm, which will translate to 2 layers at 0.2mm layer height.
I was struggling with part adhesion and bed leveling until using this. Problem solved! I recommend setting approximate height with paper to begin with so you know you are in the right ballpark before beginning this print. I used it on my stock Ender 5 Pro.
Material: take your pick PLA, PETG, ABS, Nylon, etc
Layer height: I used 0.2mm