Compact Tripod XS
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an XS version of the tripod I re-designed inspired by Kernel770's tripod.
- Rating
- 4.889 / 5
- Likes
- 140
- Downloads
- 489
- Makes
- 9
- Views
- 3,146
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is an XS version of the tripod I re-designed inspired by Kernel770's tripod. It was primarily designed for those with really small 3.5in³ printers and has shorter legs. In all other aspects it is identical to my larger tripod.
It can handle a heavy DSLR with heavy lens and is so small it can stay on the camera. :)
The camPad is printed in flexible TPU and the rest in ecoPLA.
The 1/4-screw is held in place by a small piece of filament glued in place by CA-glue.
Support is recommended when printing camMount.
Using toothed washers with external-tooth is recommended for heavy setups but is otherwise not needed.
As always, if you find it useful a tiny donation goes a long way to show appreciation. :)
Hardware needed:
1 pcs M5x50 hex-head screw
1 pcs M5 nut
2 pcs M5x10 countersunk screws
2 pcs M5 Nyloc nuts
1 pcs 1/4 10mm screw (
http://www.amzn.de/dp/B00OOLKD3K
)
2 pcs M5 toothed washers (external-tooth)
Print instructions
See attached 3mf-file. I've printed successfully in PLA and PETG. Print the pad preferably in flex material like TPU.
If you like my designs please consider donating a coffee or any amount really, I appreciate the gesture.
https://www.paypal.com/donate/?hosted_button_id=QEF27KJ6FXGM6
