Rancilio Silvia LoadCell Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple mount for loadcells to build a scale in your Rancilio Silvia
- Rating
- 5 / 5
- Likes
- 21
- Downloads
- 274
- Makes
- 1
- Views
- 3,247
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Since the height under the brew group is limited, I designed a space-saving adapter to hold the loadcell.
It is easily printable without support, ideally made of some temperature resistant material.
As the Silvias have slightly changed over time, I made adaptations for the variants.
LoadCellMount_for_V1andV2 is for the V1 and V2
LoadCellMount_for_V5 is for the V5
The spacing of the holes for mounting a load cell are 15mm.
If you have another model, just send me the measurements and I can adapt to those.
I added a new LoadCellTrayHolder adapter, wich is shorter and works better for me.
The file “LoadCellMount_for_x” has to be printed two times, first time in original orientation for the left side and for the right side you have to mirror it in your Slicer.
The “LoadCellTrayHolder” is the same for both sides.