Surveillance Camera Trophy
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I created this trophy as a design challenge to make something printable without supports as well as being modular to…
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 105
- Makes
- 1
- Views
- 645
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I created this trophy as a design challenge to make something printable without supports as well as being modular to allow for other trophy toppers.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Supports:
No
Resolution:
.2mm
Infill:
15%
Filament:
Atomic PLA
Notes:
I sliced these files in Cura to take advantage of the ironing settings (top layer only | concentring) on the camera body and the base.
x2 laurels are required, the stl needs to be flipped so the surface finish matches on both.Post-Printing
A spare piece of red filament is inserted into the hole on the front of the camera and trimmed flush.
Some glue may be necessary, depending on your printers tolerances, to join the pieces together.
Category: Other