1 / 2
GPU Brace 70-120mm
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just a simple screw-jack GPU support brace.
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 197
- Makes
- 2
- Views
- 851
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- GNU General Public License v2.0
Just a GPU support brace. I used 3m VHB tape to secure the top and bottom. Then just used the screw jack until your GPU is level. Should fit gaps from 70-120+ mm. FOr reference, my gap was 80mm and it works great.
Recommend a .6mm nozzle so you get good layers on the threads. I used .6 nozzle and .2 layer lines. THe screw was perfect. If you have difficulty, you can asymetric scale down the screw (male) in X+Y directions. leave z as is.