1 / 2
Artillery Sidewinder X1 & Genius BL-Touch Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A mount for the BL-Touch to an Artillery Sidewinder X1 or Genius.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 124
- Makes
- 0
- Views
- 1,229
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution
Another mount for the BL-Touch to an Artillery. Either the Sidewinder X1 or Genius. There are two versions. One with a clip to hold the BLT wires. This on is if you want to run dedicated wires from your BLT to the main board. And one with out the clip if you are doing the Waggster wiring method. Shown is the one with the wire clip. The holes are sized for M3 strews. You can tap them or just run a screw into the holes.
The offsets are X 30mm and Y -16mm
I printed mine 100% infill at 0.2mm layer with no supports.