IKEA EKENABBEN hole drill jig
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Do you want to mount the shelves in slightly different locations than the predrilled ones? Then this is for you!
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 15
- Makes
- 0
- Views
- 362
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
IKEA EKENABBEN comes in two different sizes, when recently buying the taller one I had an issue with the fixed spacing between the shelves and needed one of them to sit higher. Turns out the precision of the existing holes are not the best, but measured them all to come up with an average and created this simple drill jig to solve the problem.
I supply the necessary mirrored model as well, and I printed two of each so I could clamp them all at the exact same height.
Print them as they're laid out in the 3MF, layer height probably works with 0.3, I went with 0.2 and two perimeters. No need to make these super sturdy since most people will only use them once. Mine are now in my PLA recycling bin!