1 / 6
Pegboard Anchor for IKEA SKÅDIS
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Just a simple anchor for IKEA SKÅDIS Pegboard.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 60
- Makes
- 0
- Views
- 780
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
The pressed-in M3 nut allows simultaneous fastening of the anchor and whatever you put on top. The screw has to go all the way (11mm) through the anchor.
For measurements see the attached drawing.
Recommended Print Settings:
- Nozzle Size/Line Width: 0.4mm
- Layer Height: 0.12mm
- Perimeters: 3
- Top-/Bottom-Layers: 4
- Infill: 30% Rectilinear
- Speed: <50mm/s
Print Time: ~8min per piece (20 in 2h26min)
Weight: 0.84g per piece