Sous Vide Water Bath Bracket - Fits Original Anova Precision Cooker
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the companion part for that fits the original anova precision cooker bracket and includes 3d printed screws
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 221
- Makes
- 5
- Views
- 1,353
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
This is the companion part for Sous Vide Bracket - Fits Original Anova Precision Cooker by Stefan | Download free STL model | Printables.com but it will also fit the original bracket that comes with your Anova. I designed it so that you can use the original metal screws, along with the Anova clamp and water bath screw and cap (the anova clamp can only be removed if you take the original bracket apart which requires drilling out the 3 screw plugs on the original bracket) or use all the 3d printed screws and clamps.
I recommend a high-temperature filament such as ABS or Polycarbonate otherwise it will likely warp over time due to the heat of the water bath
Parts
Required
Requires 2x M3 Nuts and 2x M3x16mm screws to attach Side A and Side B.
Optional
You can use the original wood screws to attach the Sous Vide bracket to this or you can use an additional 4x M3 nuts and 4x M3x8 screws instead