1 / 3
hockey stick hanger
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
a hanger from a used hockey stick and a PET bottle
- Rating
- 5 / 5
- Likes
- 44
- Downloads
- 204
- Makes
- 3
- Views
- 1,300
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Hanger from a used hockey stick and PET bottle. PET 0.2mm layer, 10 bottom and top layers, 6 perimeters, 50% filling. The right and left sides are the same, or it is possible to mirror the model directly in the slicer. It is necessary to print with supports due to the mounting that is inserted into the hockey stick. The external dimension of the hockey stick is 28x19mm. Because the inside of the hockey stick is not accurate in its entire length, I am attaching a model with a conical end.