1 / 1
Slower Volumetric Flow Test for Bambu Lab
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Flow test for Bambu Lab using smaller speed increment steps (10 mm/s) for filaments like TPU.
- Rating
- 0 / 5
- Likes
- 70
- Downloads
- 676
- Makes
- 2
- Views
- 5,341
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Public Domain
Flow test for Bambu Lab using smaller speed increment steps (10 mm/s) for filaments like TPU.
To calculate your flow, use the slicer values for the flow rate. We will follow this procedure using this example flow:
- First layer flow is 2.93
- Last layer flow is 50.8 (layer 60 in this case with a .8mm nozzle. This will vary by nozzle height)
- Input these numbers into a slope intercept form calculator
- Our example gives us: y= 0.81x + 2.12 ; where y is the flow and x is the layer number
- So if your print looks clean up to layer 20, we have .81(20) + 2.12 = 18.32 flow rate
- Use 90% of the given flower number (for tolerance) at your leisure