1 / 2
CNC end stop for the Saunders Hobby Mod Vice
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Works with the Saunders hobby mod vice and a fixture plate with 6mm holes. May work with 1/4" hole fixture plate too.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 50
- Makes
- 0
- Views
- 482
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple end stop with moderate travel that is designed for the Saunders Hobby Mod vice. I use it on my 6mm fixture plate, with holes spaced 20mm apart.
It will be about 2.5mm higher than the bottom of your part and since it is plastic, doesn't matter if you accidentally mill through it!
While this works made out of plastic, I will be milling it out of Aluminum as well.
Printing:
I used PLA, .4 nozzle, .2mm layer thickness, 25% infill.