Toothpick Holder
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.17 – €2.66 net (excluding VAT)
For file: Toothpick Holder_0.2mm_PETG_MK3S_2h31m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.41 excluding VAT (range midpoint).
- Weight reported by the author
- 30 g
- Print time reported by the author
- 2.52 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Fully printed toothpick holder/dispenser with a bottom plug for easy refills. The bottom threads in securely.
- Rating
- 4.875 / 5
- Likes
- 44
- Downloads
- 332
- Makes
- 11
- Views
- 1,813
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
This is a toothpick holder has a screw-on bottom for refills and a plug on the top that slides back to allow the toothpicks to be shaken out easily and quickly. The access hole is on the edge of the cylinder so you can more easily get out that last toothpick.
Will fit 66mm long toothpicks without issue. Should fit 68mm long toothpicks at a slightly reduced capacity.
Printing Details:
- material: PETG (The plug uses a compliant mechanism to snap into place, and was designed for the flexibility of PETG)
- Perimeters: 3
- Layer Height: 0.2mm