GroundFox Rear Bed
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a rear bed designed to fit the GroundFox LCG chassis.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 120
- Makes
- 0
- Views
- 802
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution — Noncommercial
This bed is specifically designed to fit the GroundFox LCG chassis by the Artful Dodgers. It most likely won't fit other LCG chassis due to the specific dimensions. The mounting holes are designed to hold the bed in place but won't add any additional strength to the chassis itself so do not overtighten because you'll just strip out the plastic.
There are 3 different variations, one with the wood effect slates on top. A second plane version if you're not looking for a wood effect. Lastly there is a version with a hole to accommodate a lower suspension setup.
It should be possible to print without any supports. I added a 12mm brim to help it stick to the bed as I found it would lift up at the corners