1 / 2
Bracket/stand for PARKSIDE PMGS 12 B2
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
The bracket allows horizontal mounting of the micro grinder to the desktop.
Print instructions
Recommended material: PETG, but PLA should also work
Settings: strongly advise to use more perimeters (4? 6?), 0.2mm layer height, supports required only for bracket.
You will need:
- Printed parts
- Mounting clamp from IKEA Tertial or similar (just L shaped bolt, jaw and nut, IKEA one has diameter of 7mm)
- One M4x50mm bolt (You may also use two M4x20, or M4x25) - hinge, two washers (for M4 bolts).
- Two M4x25 (M4x20 should also work)
- Optional: some padding (self-adhesive flece or rubber feet)
Holes in clamp (for hinge bolt) and in base (for mounting bolts) are tight enough to hold screws in place.