1 / 2
Raspberry Pi High Quality Camera wall mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Camera mount for the Raspi HQ camera
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 95
- Makes
- 0
- Views
- 515
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
A wall mount for the Raspberry PI HQ Camera. I am using this for my 3D printer's enclosure but it can be mounted anywhere else.
Part list
- 4x 2.5 mm screws to attached the camera to the mount
- 2x 3-3.5mm counter sunk screws to attached wall mount to the desired surface
- 5mm screw that is at least 30mm long
- 4x Stand-offs-4x.stl
- 1x Camera-Mount-1x.stl
- 1x Horizontal-Swivel-1x.stl
- 1x Wall-mount-1x.stl
Printing instructions
- No supports
- 30% infill
- PLA is good enough