iPad and Kindle Charging Station
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Provides charging and storage for 4 iPads and 4 Kindles. The USB hub I used only has 6 ports; so using splitter.
- Rating
- 0 / 5
- Likes
- 70
- Downloads
- 372
- Makes
- 0
- Views
- 3,286
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial
This has 4 slots that will hold an iPad with a case and 4 slots that will hold a Kindle with smaller case. The slots are 27 mm and 16 mm respectively. The area behind the hub can store some of the extra cord from the hub.
Materials
- I used this USB hub. https://www.amazon.com/gp/product/B00P936188/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1
- The cables I am using are 8 inches, which reach comfortably for the iPads.
Print Instructions
Both of the parts can be printed on an MK3S.
I used a 3 mm brim for the iPad section to help with adhesion especially in the corners. The iPad section also needs supports for the USB hub opening, but will need to put support blockers to prevent the supports from going outside the print area.
I used a 5 mm brim for the Kindle section since there was some extra space. I ended up using supports on the longer sides, but I don't think it was necessary.