D-Link GO-SW-5G wall mount bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Minimalistic wall mount bracket for D-Link GO-SW-5G switch.
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 96
- Makes
- 1
- Views
- 373
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
Minimalistic wall mount bracket for D-Link GO-SW-5G switch.
The bracket is fastened to a wall with two countersunk screws/bolts.
I used a standard screw & ⌀6mm wall plug to fix it to a brick wall.
The switch has a protruding rim all around that is used to snap the switch into the bracket.
I printed mine in ABS, 0.2mm layer, 0.5mm nozzle. No supports needed.
Keep in mind that there are other brackets for the same switch around:
https://www.thingiverse.com/thing:1380615
https://www.thingiverse.com/thing:3718540
I made my own because one of these would be hard to mount on a brick wall, he other cannot me fastened upside down. Besides I wanted a bracket that does not cover any ports and allows me to detach the switch without unscrewing the bracket form the wall.