Skadis Holder for SIPA WZU 83 Key
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A holder for a SIPA WZU 83 laundry machine key for the IKEA SKÅDIS pegboard.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 23
- Makes
- 0
- Views
- 388
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
This is a SIPA WZU 83 laundry machine key holder for Ikea Skadis pegboards. It uses Skadis T-Nuts for easy and secure installation.
- Insert key both ways
- Slightly angled for easy access (space for fingers)
- STEP files available for easy remixing
 | Read more about the Skadis T-Nuts Mounting System and check out the Skadis T-Nuts Collection for more Skadis accessories that use T-Nuts. |
BOM
| Qty | Description | Sourcing |
|---|---|---|
| 1 | M2.5 DIN934 Hex Nut | Aliexpress |
| 1 | M2.5x12 (or longer up to 20mm) Socket Head Cap Screw | Aliexpress |
Printed Parts
| Qty | Part | Download |
|---|---|---|
| 1 | Skadis SIPA WZU 83 Mount | this project |
| 4 | Skadis T-Nut M2.5 | Download here |
Printing
Print the part in the original orientation. All STL files are pre-rotated for printing. Check out the Skadis T-Nuts page for T-Nut print settings.
Print Settings
- Material: PETG, PLA, etc
- Layer height: 0.2mm
- Extrusion width: 0.4mm
- Perimeters: 3 or more
- Infill: 20% or more
Assembly and Installation
Step 1 - T-Nut
Prepare the T-Nut. Push the M2.5 hex nut into the bottom of the T-Nut. You may have to use some pliers or other tool to push them in.
Step 2 - Assembly
Push the M2.5 screw through the hexagonal access hole and through the screw hole. Screw the T-Nut onto the screw and leave a gap of about 2mm between the T-Nut and the holder.
Step 3 - Installation
Align the T-Nuts in the vertical orientation and push the assembly through the desired hole on the Skadis board. Tighten the M2.5 screw. The T-Nut will lock in the horizontal orientation on the back of the pegboard and hold the part tightly as you tighten the screw.
To remove the holder again just loosen the screw half a turn and pull the whole assembly off the board.
