Adjustable while Mounted modification for Taz Dual v2 to v3 Mod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I made adjustments so that the toolhead can be rotated while mounted. Fine adjustment is possible with the top screws.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 13
- Makes
- 0
- Views
- 128
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
I made some changes to allow for loosening and adjusting the plate to account for z height differences. Assemble, and when mounted, loosen the three front-facing socket head screws, and top fine adjustment screws. Lower the toolhead near the bed. Use a sheet of paper of feeler gauge, and use the fine adjustment screws to nudge the nozzles either way. One must be loose for the other to pull, but you should get the hang of it. Once the fine adjustment is complete, tighten up all the adjustment screws and re-verify.