1 / 6
Replace DIY type shower door holder / wheels
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
DIY shower bolts and wheels come undone and are not strong enough to hold the door. These wheels replace the system.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 74
- Makes
- 0
- Views
- 372
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Share Alike
Replace shower door wheels with these.
Combine with M4 x 30mm bolt (or your local equivalent)
The other STL file you can use an M4 x 20mm bolt and use it to replace the rubber blocks and force this in, after tightening the screw it is much sturdier as a block. (to avoid shower door going too far)