Brass Catcher for sig p320 and p365 xmacro
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Might even work for anything with a pic rail dust cover
- Rating
- 0 / 5
- Likes
- 30
- Downloads
- 179
- Makes
- 0
- Views
- 3,418
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I think I've finalized this. I made a version that fits both a p320 and a p365 xmacro (the regular p365 doesn't have a pic rail unless you add something - I don't have this attachment). In order to work with both, it had to be taller. And to be strong, I simplified it and just made it thick.. There's room for your finger to rest on the frame. I would print the basket in TPU as it is with supports.
The rest in PETG 30% 5 walls and 4 top and bottom layers should be fine. You can do more walls and top/bottom.
I made a version that fits a pic rail for a PCC. Works great, larger basket and catcher though (because my PCC has a large-ish ejection port). Will post that separately.
You'll need some m3 x (25mm?) screws and m3 locknuts. And of course the m3x35? for the QR - can't remember but you can view the original for that hardware spec.
You can see some carbon and scorching on the front. My p365 has a comp with side ports. It's still strong and holding up fine after about 20 mags.