Laserpecker 3rd axis roller tensioner arm and end stop
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Laserpecker 3rd axis roller tensioner arm and end stop
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 101
- Makes
- 0
- Views
- 856
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Laserpecker 3rd axis roller tensioner arm and end stop to help keep/ hold down any glass or flask firmly on the 3rd axis roller.
This is used for both:
- Leveller: https://www.printables.com/model/361772-rotary-support-leveller-roller-3rd-axis
- Christmas Bauble: https://www.printables.com/model/362065-laserpecker-3rd-axis-roller-rotary-christmas-baubl
Hardware Required:
Nitrile Rubber O-Rings 27mm OD 22.2mm ID 2.4mm Width, Metric Sealing Gasket
Wheel into Arm: M3x12 hex screw bolt and 2 washers
Attach arm to Main body: M3x30 hex screw bolt and nut
Spring Steel Coil Extended Compressed Spring, Wire Diameter 0.039", OD 0.28", Free Length 0.79" (cut off about 2-3 twists soo not too tight.