1 / 2
Slot Car Track Timing Bridge for Smartphone — image 1
1 / 2

Slot Car Track Timing Bridge for Smartphone

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Commissioned for use with a ~3" wide phone running the LapTrax app over a 4 lane Carrera track.

Rating
5 / 5
Likes
59
Downloads
385
Makes
4
Views
2,252
Reviews
3

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Commissioned by Charles_R on SlotForum, with thanks to him for the photos, I designed this simple bridge to hold a smartphone over the track to facilitate reliable lap counting of a slot car on a 4 lane Carrera 1/32-1/24 scale track using the LapTrax app. Similar apps may work as well. 

The ends are designed to be attached to the center span using M3 socket head cap screws of an appropriate length. The center spans are connected using pressure fit with the pins. You might need a THWACK! or some clamps to successfully connect the two center spans. The spacers are only needed if you want to make the bridge wider than the track. They should be loose enough to slip on.

See notes on each file for what to print.

The Fusion360 file is included for those who would like to change the center span section for different types of track.

Update 8/23/24 - Added a 2 lane center piece option for 2 lane tracks

Update 4/12/23 - Reduced the size of the end support by just a few mm so that it can print on an Ender 3.