Retro TV Raspberry Pi case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A retro TV case for Raspberry Pi based on a Toshiba Blackstripe. Includes a "no-signal" splashscreen for RetroPie.
- Rating
- 5 / 5
- Likes
- 183
- Downloads
- 531
- Makes
- 2
- Views
- 6,404
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
This model is now outdated. Check out V2 here!
-----------------------------------------------------------------
Retro TV case based on a Toshiba Blackstripe I made for a Raspberry Pi 3B to run RetroPie and play cartoons. Designed to fit a Pi 3B with a 3.5 inch HDMI MPI3508 LCD display.
In addition to the print you'll need:
- Raspberry Pi 3B (might fit Pi 4 but I haven't tested)
- 3.5 inch HDMI MPI3508 LCD display with HDMI crow connector (such as this one)
- Right angle micro-usb adapter (such as these) to allow power cable to be connected from the back of the TV. Pi 3B uses the “down” version.
- SD card with RetroPie (or whatever you want to run)
- 4x M2.5x5 screws for the shell
- 2x M2.5x8 screws for the antennae
- 2x M2.5x8 screws for the base
Optional:
- 30mm 5V fan (such as this one)
All parts except base, pi_case, and viewport should be printed with supports. The front is printed as multi-material.
RetroPie Notes:
I used the following values in my /boot/config.txt to reduce the display output to 4:3.
overscan_left=-10
overscan_right=65
CHANGE LOG
Feb 13 2023
- Added bracing tab for USB adapter to Base.
Feb 3 2023
- Added speaker gaps to Front grill.
Feb 1 2023
- Added 30mm fan mountable version of Back.
- Added channel gap in Pi Case for fan wires.
- Cut left side corners off Viewport for better fit.
---------------------------------------------------------------------
Have fun!