Rook Top and Bottom Frames: Moar Holes Mod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple mod to add more heatset insert holes on the top and bottom frames to increase modularity.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 25
- Makes
- 0
- Views
- 378
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This is a simple modification for the MK1 Rook top and bottom frames to swiss-cheese-ify them, adding a bunch of extra holes for heatset inserts.
I've added holes on the sides with the same spacing as the rear on the top frame and used the same spacing (29.5mm) to add symmetrical additional holes in respect to the feet mounting holes to the bottom frame.
Both can be printed in the same orientation and with the same settings as the originals.
Many thanks to Rolohaun for designing and releasing the Rook mostly printed 3D printer.
The original project can be found here: https://github.com/rolohaun/Rook