Third Reality Zigbee Contact Sensor Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This sensor holder allows easy battery changes. Simply lift out the sensor to change the batteries then put back.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 28
- Makes
- 0
- Views
- 260
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Third Reality Zigbee Contact Sensor Holder. I made these to hold these sensors because changing the batteries was difficult when mounted to the wall. Now, you can mount the holder to the location desired and simply slide the sensor out for easy battery changes.
Simply mount the holder as you would the actual sensor, then mount the magnet next to the holder to get the correct spacing. The magnet will be strong enough to activate the sensor even when in the holder.
These were designed so that the activation LED is still visible and the sensor can be easily removed from the holders when changing the batteries is required.
I print these using:
- PLA
- .2mm layer height
- 40% infill
- Color as required to match
There is nothing critical about your settings. You can change them to suit your personal favorite settings.