Projector / Camera Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a four degree of freedom mount originally designed for a small LED projector.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 19
- Makes
- 0
- Views
- 393
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
This is a four degree of freedom mount originally designed for a small LED projector. Wanted something easier to adjust finely than a ball mount and I needed the extra DOF for my particular situation.
Designed around an "L" made of 1/2" copper pipe. The pipe clamps pieces have some tolerance in them but are intended to be tight. Running the pipe through them a few times will smooth things out a bit for easier adjustment (or use some sand paper).
Carriage bolts, washers, and nuts tighten down the pipe clamps, and a socket head screw holds onto the projector (or camera or what-have-you). Adding some rubber or something else grippy to the projector mount will help keep it from rotating. Included is a picture of how the bolts should go.
Orient the parts sideways so that the cross section of the pipe clamp areas are flat to the bed.