Printception Business Card Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A business card holder made to look like it's being printed with an 8mm nozzle
- Rating
- 4.933 / 5
- Likes
- 271
- Downloads
- 813
- Makes
- 18
- Views
- 2,623
- Reviews
- 15
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This business card holder was inspired by the Printception collection designed by MakeAnything and I used his tutorials for designing my version. It was also inspired by the Coaster - Printing in Progress designed by SNASA
This model was printed in PLA with a 0.4 mm nozzle at a 0.2 mm layer height. Support isn't needed for either model even for the nozzle if you print it screw side up.
The nozzle is simply pressed into the end of the filament but it can be glued if desired. Cards are displayed in the center groove and they can also be stored in the hollow section behind.