Replacement tires for Bugatti Galatea Luggage
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
After several years of use the tires on the luggage rollers tend to break. This is a replacement tire.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 28
- Makes
- 0
- Views
- 420
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
After several years of use the tires on the luggage rollers tend to break despite the rest still being in perfect condition. This is a replacement tire.
Since I currently don't have TPU available I printed this in PETG although TPU likely would be much better for that purpose. To make the PETG print also a bit “soft” I printed with 3 perimeters, no infill, and no solid bottom or top layers. Despite the open bottom and top the model still results in a closed print since the 3 perimeters are enough to fully cover everything.
The remaining parameters are 0.4mm nozzle, 0.2mm layers with otherwise PrusaSlicer standard options
Note that the print is a very tight fit since you don't want the tire to fall off when used. This might require pliers to carefully install them though.
This fits the Bugatti Galatea Luggage I bought several years ago and might also fit other wheels with a tire diameter of 55mm, an outer rim diameter of 49mm, an inner rim diameter of at least 47mm, and a tire width of 11.8mm. For all other sizes, the OpenSCAD file is included such that you can adapt it.