Burr Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modular burr stand for different shank sizes.
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 35
- Makes
- 1
- Views
- 232
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I have a few drill burrs for cutting and grinding. I wanted a way to bring all my burrs to a single place and neatly make them accessible. Two added complications are that the shank sizes are either 6mm or 6.35mm (1/4in), the second complication is that the burrs are uneven in width, especially grinding bits.
My solution to the complications is to have a modular burr stand. The bases have the following capacities:
- 6 x 6.35mm shank
- 8 x 6.35mm shank
- 8 x 6mm shank
Each stand is 75mm wide by 15mm high. Stand modules securely clip together, much like jigsaw puzzles to make a train like stand.
As I find more useful burrs, my modular approach allows me to just add a stand module that matches my burr growth.
My print is made in PLA 1.75mm Aurarum Gold filament, with 0.2mm layer height and 15% infill on a PRUSA I3 MK3S printer. No print supports required.
I hope you can find this print useful, too.