Adjustable Leveling Foot for Wood Projects
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Leveling feet for wood working projects such as the Christmas tree stand shown or for small tables etc. See images for…
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 77
- Makes
- 0
- Views
- 651
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Leveling feet for wood working projects such as the Christmas tree stand shown or for small tables etc. See images for detailed dimensions. Maximum adjustment height is about 5/8". The 1.34" OD matches the diameter of large self adhesive felts to protect wood floors. I sized this to fit a 1" diameter drilled hole as shown in the 2x4 legs in the images. Use wood glue or another adhesive to bond the female part in place.
The ACME thread fit may be a little tight initially but will thread in and out freely after a few uses. Lightly sand the outside diameter of the male thread to help with a smooth fit if needed.
Recommend printing this solid for maximum strength. Please do your own testing to determine the maximum load capacity for your project. Do not use for projects that might be a personal safety hazard if the foot should break or fail in use.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.3mm
Infill:
100%
Filament: Any PETG Any
Category: DIY