Rook-235 & 225 Mod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
extend your Rook-180 to 235 or 225!
- Rating
- 5 / 5
- Likes
- 52
- Downloads
- 167
- Makes
- 2
- Views
- 2,425
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
I wanted to see if i could extend the Rook to fit an Ender3 bed.
The Z rods can be kept stock, or use longer ones for a higher Z. With 450mm rods on Z, the z volume is 280mm
X and Y uses 8x360mm rods.
Note:
If you have the Rook 180 TURNED by Woodknight, you need to use Rappetor's turned version of this mod from HERE
EDIT:
Got a request to make a 225 version to use 350 rods as they are more accessible.
I have not made any mounts for the bed as im planing on using VHB tape and a Glass bed.
To have a complete set you would need to print:
1x Bed-Plate
1x Bed-Plate Nut
1x Bottom Back Frame-extender
1x Top Back Frame-extender
3x Top Frame-extender
3x Bottom Frame-extender
(Grey parts in picture is the mod, green is stock parts)
Added the STEP files for those who want to cuustomize the design