SeedSigner print-in-place pill
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The SeedSigner PiP-Pill is a compact case with a print-in-place hinge and a very comfortable user experience.
- Rating
- 0 / 5
- Likes
- 50
- Downloads
- 952
- Makes
- 1
- Views
- 4,984
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The SeedSigner PiP-Pill is a compact case with a print-in-place hinge and a very comfortable user experience. This compact enclosure makes use of the smaller “zerocam”, making it small enough to fit in any pocket. The trackball, thumbstick and buttons can be printed from TPU or PLA. TPU is recommended, get a roll, it'll last forever.
Print settings:
- No supports
- 2 perimeters
- 15 - 30% infill
The case is designed to be printed with 2 perimeters, especially on budget printers, the hinge could bind and then break if you set too many perimeters or your printer is overextruding a lot.
There are two different trackball files included with slightly different tolerances to make up for the TPUs sagging overhangs. Just print both and use the one that fits better.
Slice yourself or be careful when using gcode files you didn't generate yourself.
Please don't forget to post a make!
If you want to support me, you can send a few Sats here
Note: You can buy a readily printed case in the color of your choice here