IKEA ALEX (wide) Gridfinity Baseplate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple Baseplate for the IKEA ALEX drawer
- Rating
- 4.9 / 5
- Likes
- 497
- Downloads
- 2,694
- Makes
- 30
- Views
- 15,781
- Reviews
- 30
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
You need to print this 4 times. Position the extruded sides to the outsided where the screws for the drawer mechanism are. It's a perfect fit but a bit of superglue wont hurt.
The Grid is 14x10 and up to 8 height on the smaller drawer and 10 height on the Larger bottom ones.
The side clearance is enough so you wont touch the sidescrews with any normal size drawer.
The last 3 grids on the back are not easy to reach and not reachable from the top so i suggest using them for “deep storage”.
The Printable file is designed for a Voron with a 350mm Baseplate. If you need it cut in a different way for smaller Baseplates let me know.