Voron 0.2 Orbiter 2.0 Trianglelab CHC Mini StealthBurner
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Orbiter 2.0 mod for Voron 0.2 Mini StealthBurner, replace the Revo heater core with Trianglelab CHC
- Rating
- 5 / 5
- Likes
- 109
- Downloads
- 723
- Makes
- 1
- Views
- 7,789
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution
Orbiter 2.0 is a great extruder and I have been using it on my Voron 0.1. Now V0.2 is out and I made a mod for it.
There are many E3D Revo heater core failed, mine included. I keep using the Revo Voron heatsink but replaced the heater core with one from Trianglelab CHC. It needs a Hemera heatbreak to interface the heatsink and the heater, performance is top level, I get very consistent and accurate prints from it.
This mod is very flexible, you can use any part you want, they are all interchangeable.
Front cowling:
- The upper part of the original cowling is cut, and added the Orbiter interface
- You need 3x M3xD5xL5 heated insert, L4 should also work
X-Carriage:
- X-Carriage is modified so that the cowling is mounted by 3 bolts on a flush surface, very sturdy and no tolerance problem. The original 0.2 X-Carriage can still be used but make sure not over-tightening the 3rd bolt.
- For those who still are using V0.1 but only want to upgrade the toolhead: There is an X-carriage with endstop, so you can keep using the endstop
- You need 1x M3x20 BHCS bolt
Hotend Mount:
- Added support for a Frankenstein hotend: Revo Voron heat sink + Hemera heatbreak + Trianglelab CHC heater core
- With CHC the hotend will be 2mm shorter, so this hotend mount compensates for that, which means it's not compatible with Revo heater core. Only CHC.
- Optimized airflow
Update 02-Feb-2023:
- Added Hotend mount for Frankenstein Revo Voron CHC hotend
- Special thanks to Kignis for testing and photos