Planter 04 - Too Simple For This Pot, with drainage hole and saucer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Size it up/down as you wish - make it small, medium, or go large!
- Rating
- 5 / 5
- Likes
- 73
- Downloads
- 523
- Makes
- 5
- Views
- 1,344
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
https://www.buymeacoffee.com/maxt
----------------------
Size it up/down as you wish - make it small, medium, or go large!
Use it with or without a saucer - it all depends on your usage. No matter what, I suggest adding some felt pads to the bottom to minimize the probability of scratching your table/floor, and to ensure some ventilation under the planter/saucer to minimize condensation issues.
Or you could hang it up from the ceiling.
SETTINGS / PRINTING (recommendation)
Filament: PETG or PLA. Please note that PLA can deform/break down in the sunlight. In addition, some types of PLA are biodegradable.
Print: 0.2mm
Nozzle: 0.4mm
Support: Not required
Brim: Not required
Infill: 5-25% (depending on the size of the planter, soil type, plant size, etc)
Perimeters: at least 2, best 3 (minimizing probability of holes and water damage to your table)
Vase mode: No. While it is tempting to 3D print planters in the Vase mode, I find that there is just not enough fusion between the layers. In addition, a few micro-holes may appear during the sanding/handling of the finished planter. The water will find its way, even through a rock, so there's no reason to risk it.
OTHER
- If you are really worried that the planter might leak, use a waterproof sealant spray (for example Rust-Oleum Crystal Clear) inside of the planter, 3-4 coatings should be enough.
You could also read the official Prusa blog post “Watertight 3D printing PT1: Vases, cups and other open models”.
- To minimize soil from migrating out of the pot drain hole, use a mesh pad/drainage net - and it will keep your deck, house, or table clean.
- To make the planter smooth and shiny, you could use sandpaper, prime it, (spray)paint it a couple of times and use a varnish coat on top.
