1 / 1
Firewalla Gold Stand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
A simple stand to elevate a Firewalla Gold to allow for better ventilation.
You will need to print a top and bottom, along with four of the locking feet. The STLs are correctly oriented for printing. The step file can be split into parts as well, but you will need to correctly orient the separate pieces.
I would suggest printing this in either PETG or ABS since the router can get quite warm.
Print settings
- 0.2mm layer height
- 3 walls
- 15% infill
- May need some support in the top and bottom halves where the cutouts are for the feet locking clips