1 / 5
Coffee Shop Business Card Holder — image 1
1 / 5

Coffee Shop Business Card Holder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Inspired by coffee shops I frequent. It can hold business cards that have a horizontal orientation or vertical.

Rating
0 / 5
Likes
9
Downloads
53
Makes
0
Views
483
Reviews
0

Updated at source:

Model information

Category
Office
License
Creative Commons — Attribution — Noncommercial — Share Alike

The design was inspired by the coffee shops I visit who have business cards and pens/pencils.  They're always separate with the writing implements in a coffee cup.  I though combining the two was a logical move. 

I've added a tilt and recess to the holder to help separate the cards as they are displayed for an easier grab (I hate trying to take one and end up with three or four).  I've also made it large enough to display a horizontal or vertically oriented business card.

(Doubles as a pen cup and Post-It holder if you don't have business cards)

Printing Instructions:

  • Material: Any, a CF darker color would give it a smoother look than my red PLA pictured.
  • Supports: None
  • Layer Height: .2 Quality setting in the PrusaSlicer or your preference.
  • Post Processing: Would recommend if you are giving this to your favorite coffee shop to use a clear coat or waterproof epoxy to make it easier to clean.  Spills at the counter happen especially if you haven't had coffee yet.

Tags