1 / 9
Insignia NS-DCR30D3K USB 3.0 Advanced Memory Card Reader Holder — image 1
1 / 9

Insignia NS-DCR30D3K USB 3.0 Advanced Memory Card Reader Holder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I have designed a mounting system to hold Insignia NS-DCR30D3K USB 3.0 Advanced Memory Card Reader, so it's not moving…

Rating
0 / 5
Likes
0
Downloads
14
Makes
0
Views
299
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial — Share Alike

I have designed a mounting system to hold Insignia NS-DCR30D3K USB 3.0 Advanced Memory Card Reader, so it's not moving around when you're trying to use it. To fasten the mount you can use double sided tape, use the provided holes, or use the lower brackets to fasten onto a wire rack. Use a M3 screws or make the hole larger to use a bigger screws.

Link to where the card reader can be purchased: https://www.bestbuy.com/site/insignia-usb-3-0-advanced-memory-card-reader/5787403.p?skuId=5787403

Note to content creators (YouTube, Patreon, Educators, etc). Yes I understate that you are "technically" getting paid in the backend for creating content & thank you for creating that content. So to expand everyone's knowledge, you have permission to use this design in your content as long as you: State that it is not yours & acknowledge who designed it. Provide a link to where you got it from, so others can download & enjoy it as well.

BTW if you like my design, please don't forget the click the "like" button & show you appreciation.

Thanks & Enjoy!

Print Settings

Printer Brand:

TEVO

Printer:

Rafts:

No

Supports:

No

Resolution:

.20

Infill:

20% or better

Filament: Your Choice PLA / PLA+ Your Choice


Notes:

I printed it on blue painter's tape that I prepped with isopropyl alcohol to remove the wax film. Using 3D Solutech PLA black filament the initial bed temp was 60C, nozzle temp 205, no cooling fan, & print slow on the first layer (I had it at 25). On the 2nd layer to finish drop to bed temp 50C, nozzle temp 205, cooling fan high, & increase print speed back to normal.

Category: Computer

Tags