Escali Battery Door
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.45 – €0.55 net (excluding VAT)
For file: Escali Battery Door_0.2mm_PLA_MK3S_31m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.50 excluding VAT (range midpoint).
- Weight reported by the author
- 6 g
- Print time reported by the author
- 30.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
If you have one of these Escali Scales, you know the battery door last about 8 minutes. Here's a new one!
- Rating
- 5 / 5
- Likes
- 2
- Downloads
- 64
- Makes
- 0
- Views
- 329
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
You broke or lost the battery door for your Escali Scale, join the club! This model features a thicker clip than the original, so it should hold tighter and last longer.
This door is specifically for the Escali model P115FO, but may work for other models. If you try it with other models, and it works, please let me know!
Print Instructions:
Print at .2 layer height with 15% infill. I also recommend adding extra parameters around the clip (this is included in the 3MF file).
You will need to support the clip overhangs and the pivot overhangs(this is included in the 3MF file).
Notes:
If there are any issues with the model or naming, please reach out!
If you have any ideas for how this design might be improved, let me know!
If there is a variation you would like to see, contact me and I'll see what I can do!