Glowing lampshade
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
!!! IMPORTANT slicing settings!!! read first: This model was made to be printed with a 1,00 mm nozzle. You need a…
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 95
- Makes
- 0
- Views
- 1,053
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution
!!! IMPORTANT slicing settings!!! read first:
This model was made to be printed with a 1,00 mm nozzle. You need a extrusion width (or at least a perimeter width) of 1,20 mm, otherwise the perimeter will not align
You have to set diffrent slicing settings for the first 4,80 mm print height:
0.00 mm - 4.80 mm : 2 perimeter, not top layer, no bottom layer, hexagonal infill 15-20 %
4.80 mm - end : vase mode (or 1 perimeter, no top layer, no bottom layer, no infill )
Here is a video, switching light on / off:
https://www.dasfilament.de/blog/detail/sCategory/6/blogArticle/121
Category: Decor